IEMCA Elite Evo Series, Manual For Use And Maintenance, Page: 145 / 188

7 - BAR FEEDER MAINTENANCE Elite112_220_Evo_SIII
EN
7 - Pag. 5 / 5
7.5 Lubricating oils - Change
INFORMATION:
Use an external pump or when the bar feeder pump is not in use (off).
Change with an auxiliary pump
Disconnect the oil supply pipe (B) by loosening the clamp
(A).
Place the free end of the pipe in a container having a
minimum capacity of 50 litres.
Operate the bar feeder pump and drain the tank until
you hear the pump is sucking air.
Reconnect pipe (B) to coupling (C) and tighten the clamp
(A).
In order to remove the rest of the oil, place a container
(minimum capacity 10 l) under the tank and remove plug
(D).
Unscrew the drain plug and let the oil be drained out.
Clean the tank bottom.