IEMCA Elite Evo Series, Manual For Use And Maintenance

Page: 104 / 188

EN
5 - ADJUSTMENT AND SETUP Elite112_220_Evo_SIII
5 - Pag. 12 / 12
5.3.3 Telescopic front nose adjustment
TELESCOPIC FRONT NOSE (STROKE 120/160)
When replacing the telescopic front nose, it is not necessary to change completely the unit, but
only some parts supplied with the spare parts kit.
• Remove the front nose from its housing.
• Remove ring (A).
• Remove bushes (B), springs (C) and front nose (D).
• Reassemble front nose (D), bushes (B) and springs (C). The front nose and bushings must
be suitable for the bar. Reassemble ring (A).
TELESCOPIC FRONT NOSE (STROKE 170/220/320)
• Remove the front nose from its housing.
• Remove ring (A).
• Remove bush (E), front nose (D), springs (C) and bushes (B).
• Put back in place the bushings (B), the springs (C) and the front nose (D); the bushings and
the front nose must be suitable for the bar.
Put back in place bush (E), its substitution depends on the external diameter of front nose
(D). Reassemble ring (A).
• Loosen the screw (F) and remove the ring (G), then replace it with another ring suitable for
the bar. As far as max. diameter guides (
Ø
= 22 mm) are concerned, do not fit ring (G).