IEM Tel-O-Graph GSM, Instructions For Use Manual

Page: 109 / 340

Manufacturer’s EMC guidelines
51
DE
EN
16 Manufacturer’s EMC guidelines
Electromagnetic interference emissions
The Tel-O-Graph
®
GSM is intended to be operated in the electromagnetic environment specified below. Only use
the Tel-O-Graph ® GSM in such an environment.
Measurements of
interference
emmisions
Compliance
Electromagnetic environment
–
guidelines
RF interference
emissions according to
CISPR 11 Group 1 The Tel-O-Graph ® GSM uses RF power exclusively
for its internal function. Its RF emission is therefore
very low and it is unlikely that any neighbouring
electronic device will experience any interference.
RF interference
emissions according to
CISPR 11 Class B The Tel-O-Graph
®
GSM is suitable for use in
facilities other than residential areas and those
directly connected to the public supply network
which also supplies buildings used for residential
purposes.
RF interference
emissions according to
CISPR 25 Not applicable
IEC 61000-3-2 Not applicable
IEC 61000-3-3 Not applicable