IEM Tel-O-Graph GSM, Instructions For Use Manual, Page: 97 / 340

Cleaning and disinfection
39
DE
EN
Cleaning the bladder and hose:
The bladder needs to be removed from the cuff sleeve
before cleaning. To remove the bladder, pull the end of the
cuff out of the clasp and spread the cuff out fully.
Remove the bladder and hose by pulling the bladder out of
the bladder compartment via the slit provided for this
purpose on the inside of the cuff.
ATTENTION
▪ To clean the bladder and hose, use a mild fabric softener-free laundry detergent and lukewarm water.
Do not use any other cleaning materials.
▪ Ensure that no water gets into the bladder or hose.
Once the cuff, hose and bladder are completely dry, spread
the cuff sleeve out with the Velcro fastening facing
downwards. Insert the bladder into the bladder
compartment via the slit provided and thread the hose
through the small opening on the inside of the cuff. Ensure
there are no folds or creases in the bladder.