IEI Technology SPCIE-C2260-i2, User Manual

Page: 99 / 162

SPCIE-C2260-i2 PICMG 1.3 CPU Card
Page 83
5.3.5 SATA Configuration
Use the SATA Configuration menu ( BIOS Menu 7 ) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
[Enabled]
SATA Mode Selection [IDE]
SATA1 Port
Empty
SATA2 Port Empty
SATA3 Port Empty
SATA4 Port Empty
SATA5 Port Empty
SATA6/mSATA1 Port Empty
Enable or disable SATA
Device.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration

SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the serial ATA controller.

Enabled D
EFAULT
Enables the on-board SATA controller.

Disabled Disables the on-board SATA controller.

SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.

IDE D
EFAULT
Configures SATA devices as normal IDE device.

AHCI
Configures SATA devices as AHCI device.

RAID
Configures SATA devices as RAID device.