manualshive.com logo in svg

IEI Technology NANO-9453, User Manual

Share
Download
IEI Technology NANO-9453 User Manual Download Page 94

 

 

NANO-9453 EPIC Motherboard

Page 76 

5.2 Installation Considerations 

 

NOTE: 

The following installation notices and installation considerations should 

be read and understood before the NANO-9453 is installed. All 

installation notices pertaining to the installation of the NANO-9453 

should be strictly adhered to. Failing to adhere to these precautions 

may lead to severe damage of the NANO-9453 and injury to the person 

installing the motherboard. 

5.2.1 Installation Notices 

 WARNING: 

The installation instructions described in this manual should be 

carefully followed in order to prevent damage to the NANO-9453, 

NANO-9453 components and injury to the user. 

Before and during the installation please 

DO

 the following: 

 

Read the user manual

: 

o 

The user manual provides a complete description of the NANO-9453 

installation instructions and configuration options. 

 

Wear an electrostatic discharge cuff (ESD)

: 

o 

Electronic components are easily damaged by ESD. Wearing an ESD cuff 

removes ESD from the body and helps prevent ESD damage. 

 

Place the NANO-9453 on an antistatic pad

: 

o 

When installing or configuring the motherboard, place it on an antistatic 

pad. This helps to prevent potential ESD damage. 

 

Turn all power to the NANO-9453 off

: 

Summary of Contents for NANO-9453



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands