IEI Technology NANO-9453 User Manual Download Page 54

Page: 54 / 242

NANO-9453 EPIC Motherboard

Page 36

3.3 Unpacking Checklist

NOTE:

If some of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the NANO-9453 from or contact an IEI sales

representative directly. To contact an IEI sales representative, please

send an email to

[email protected]

3.3.1 Package Contents

The NANO-9453 is shipped with the following components:

Quantity

Item and Part Number

Image

1 NANO-9453

1 Quad

RS-232

(

P/N

: 32100-147900-RS)

IDE cable 44p/44p

(

P/N

: 32200-000009-RS)

1 KB/MS

cable

(

P/N

: 32000-000138-RS)

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands