IEI Technology NANO-9453 User Manual Download Page 134

Page: 134 / 242

NANO-9453 EPIC Motherboard

Page 116

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.

Legacy IDE Channels [SATA Pri, PATA Sec]

SATA Only

Enables SATA channels only.

SATA Pri., PATA Sec

EFAULT

Puts SATA channels before PATA channels.

PATA Only

Enables PATA channels only.

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands