IEI Technology NANO-9453 User Manual Download Page 201

Page: 201 / 242

NANO-9453 EPIC Motherboard

Page 183

Figure 7-21: Location Browsing Window

Step 9:

Click

to continue. A driver files location menu window appears. Click

EXT

continue. The driver is installed.

Step 0:

7.6 Realtek HD Audio Driver (ALC883) Installation

To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

7.6.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[Azalia]. See

Chapter 6

for details.

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.6.2 Driver Installation

Step 1:

Insert the CD that came with the package.

Step 2:

From the main driver menu, navigate to

X:\4-AUDIO\AC-KIT883HD\Windows

(or other appropriate OS).

X:\

represents the system CD drive. A new window

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands