manualshive.com logo in svg

IEI Technology NANO-9453, User Manual

Share
Download
IEI Technology NANO-9453 User Manual Download Page 116

 

 

NANO-9453 EPIC Motherboard

Page 98 

 

Figure 5-16: 5.1 Channel Audio Kit 

Step 4: 

Mount the audio kit onto the chassis

. Once the audio kit is connected to the 

NANO-9453, secure the audio kit bracket to the system chassis. 

Step 5: 

Connect the audio devices

. Connect one speaker to the line-in audio jack, one 

speaker to the line-out audio jack and a microphone to the mic-in audio jack. 

Step 6: 

Install the driver

. If the 5.1 channel audio kit is used, the ALC655 Realtek 

codec driver must be installed. Refer to 

Chapter 7

 for driver installation 

instructions.

Step 0:

 

Step 0:

 

5.6.5 SATA Drive Connection 

The NANO-9453 is shipped with two SATA drive cables and one SATA drive power cable. 

To connect the SATA drives to the connectors, please follow the steps below. 

Step 1: 

Locate the connectors

. The locations of the SATA drive connectors are shown 

Summary of Contents for NANO-9453



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands