IEI Technology NANO-9453 User Manual Download Page 204

Page: 204 / 242

NANO-9453 EPIC Motherboard

Page 186

computer immediately after the installation is complete or to restart the computer

later. For the settings to take effect the computer must be restarted. Once you

have decided when to restart the computer, click the “

INISH

” button.

Step 0:

7.7 Realtek AC`97 Audio Driver (ALC665) Installation

To install the Realtek AC `97 audio driver, please follow the steps below.

7.7.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[AC`97]. See

Section

6.7.2

for details.

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.7.2 Driver Installation

Step 1:

Insert the CD that came with the package.

Step 2:

From the main driver menu, navigate to

X:\4-AUDIO\AC-KIT08R\Windows

(or

other appropriate OS).

X:\

represents the system CD drive. A new window

appears showing the folder contents (

Figure 7-26

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands