IEI Technology NANO-9453 User Manual Download Page 231

Page: 231 / 242

NANO-9453 EPIC Motherboard

Page 213

NOTE:

The compatible items described here have been tested by the IEI R&D

team and found to be compatible with the NANO-9453

F.1 Compatible Operating Systems

The following operating systems have been successfully run on the NANO-9453.

Microsoft Windows 2000 with Service Pack 4

Microsoft Windows XP with Service Pack 2

Microsoft Windows Vista Business (32-bit)

Microsoft Windows Vista Business (64-bit)

Mandriva Linux 2007 (2.6.17-5mdv kernel)

Fedora Core 7 (2.6.21-1.3194.fc7 kernel)

F.2 Compatible Processors

The following Socket M processors have been successfully tested on the NANO-9453

CPU

Model Number

Frequency

FSB

Intel® Core™2 Duo

T7600

2.33 GHz

667 MHz

Intel® Core™2 Duo

T7200

2.0 GHz

667 MHz

Intel® Core™2 Duo

T5600

1.83 GHz

667 MHz

Intel® Core™ Duo

T2500

2.5 GHz

667 MHz

Intel® Celeron® M

460

1.46 GHz

533 MHz

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands