manualshive.com logo in svg

IEI Technology NANO-9453, User Manual

Share
Download
IEI Technology NANO-9453 User Manual Download Page 150

 

 

NANO-9453 EPIC Motherboard

Page 132 

 

BIOS Menu 8: ACPI Configuration

 

 

ACPI Aware O/S [Yes] 

Use the 

ACPI Aware O/S

 option to enable the system to configure ACPI power saving 

options. ACPI can only be implemented if the system OS complies with the ACPI 

standard. Windows 98, Windows 2000, and Windows XP all comply with ACPI.   

 

No 

 

Disables the ACPI support for the OS. This selection should 

be disabled if the OS does not support ACPI 

 

Yes D

EFAULT

 

Enables the ACPI support for the operating system. This 

selection should be enabled if the OS does support ACPI 

6.3.5.1 General ACPI Configuration 

Use the General ACPI Configuration menu (BIOS Menu 9) to select the ACPI state when 

the system is suspended. 

Summary of Contents for NANO-9453



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands