IEI Technology NANO-9453 User Manual Download Page 139

Page: 139 / 242

NANO-9453 EPIC Motherboard

Page 121

UDMA2

Ultra DMA mode 2 selected with a maximum data transfer

rate of 33.3MBps

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands