manualshive.com logo in svg

IEI Technology NANO-9453, User Manual

Share
Download
IEI Technology NANO-9453 User Manual Download Page 176

 

 

NANO-9453 EPIC Motherboard

Page 158 

6.6 Security 

Use the Security menu (BIOS Menu 19) to set system and user passwords.

 

BIOS Menu 19: Security 

 

Change Supervisor Password 

Use the 

Change Supervisor Password

 to set or change a supervisor password. The 

default for this option is 

Not Installed

. If a supervisor password must be installed, select 

this field and enter the password. After the password has been added, 

Install

 appears 

next to 

Change Supervisor Password

. 

 

Change User Password 

Use the 

Change User Password

 to set or change a user password. The default for this 

option is 

Not Installed

. If a user password must be installed, select this field and enter the 

Summary of Contents for NANO-9453



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands