IEI Technology ISP-9652/9602, User Manual

Page: 86 / 119

ISP-9652/9602 User Manual
Page 74
Î
Remote Access [Disabled]
Use the Remote Access option to enable or disable access to the remote functionalities
of the system.
Î
Disabled D
EFAULT
Remote access is disabled.
Î
Enabled
Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
Î
Serial Port Number [COM1]
Use the Serial Port Number option allows to select the serial port used for remote
access.
Î
COM1 D
EFAULT
System is remotely accessed through COM1
Î
COM2 System is remotely accessed through COM2
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Î
Base Address, IRQ [3E8h, A]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Î
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
ƒ
115200 8,n,1 D
EFAULT
ƒ
57600 8,n,1