manualshive.com logo in svg

IEI Technology IMBA-X9654, User Manual, Page: 38 / 266

Share
Download
IEI Technology IMBA-X9654 User Manual Download Page 38

 

 

IMBA-X9654 ATX Motherboard

Page 20 

 

Serial Peripheral Interface (SPI) support 

2.5.2 SPI BIOS Chipset: 

A licensed copy of AMI BIOS installed is an onboard SPI (Serial Peripheral Interface) 

BIOS chipset. Some of the BIOS features are listed below: 

 

AMI Flash BIOS 

 

SMIBIOS (DMI) compliant 

 

Console redirection function support 

 

PXE (Pre-boot Execution Environment) support 

 

USB booting support 

Figure 2-6: SPI BIOS Chipset 

2.5.3 Intel

®

 High Definition Audio 

The IMBA-X9654 onboard audio connector can connect to an optional audio kit. The 

codec on the optional audio kit is connected to the ICH8DO controller through the Intel® 

High Definition Audio serial link. The DMA engines in the controller move samples of 

digitally encoded data between system memory and the audio kit codec. 

Summary of Contents for IMBA-X9654











































































































































































































































































Reviews:

No comments