IEI Technology IMBA-X9654 User Manual Download Page 198

Page: 198 / 266

IMBA-X9654 ATX Motherboard

Page 180

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Intel® Chipset driver

VGA driver (Intel® Graphics Media Accelerator Driver)

Audio driver (Realtek HD Audio Driver (ALC883))

SATA driver (Intel® Matrix Storage Manager)

IDE controller (IT8211)

LAN Driver

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the IMBA-X9654 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(where

X:\

is the system CD drive) to access the IEI Driver CD main

menu.

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 198 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: