IEI Technology IMBA-X9654 User Manual Download Page 157

Page: 157 / 266

IMBA-X9654 ATX Motherboard

Page 139

Temperature n Limit of Start [020]

WARNING:

Setting this value too high may cause the fan to start only when the

CPU is at a high temperature and therefore cause the system to be

damaged.

The

Temperature n Limit of Start

option can only be set if the

FAN Mode n Setting

option is set to

Automatic Mode

. Use the

Temperature n Limit of Start

option to select

the CPU temperature at which the cooling fan should automatically turn on. When the fan

starts, it rotates using the starting pulse width modulation (PWM) specified in the

Fan n

Start PWM

option below. To select a value, select the

Temperature n Limit of Start

option and enter a decimal number between 000 and 127. The temperature range is

specified below.

Minimum Value

: 0°C

Maximum Value

: 127°C

Fan n Start PWM [070]

The

Fan n Start PWM

option can only be set if the

FAN Mode n Setting

option is set to

Automatic Mode

. Use the

Fan n Start PWM

option to select the PWM mode the fan

starts to rotate with after the temperature specified in the

Temperature n Limit of Start

exceeded. The Super I/O chipset supports 128 PWM modes. To select a value, select the

Fan n Start PWM

option and enter a decimal number between 000 and 127. The

temperature range is specified below.

PWM Minimum Mode

: 0

PWM Maximum Mode

: 127

Slope PWM n [0.5 PWM]

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 157 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: