IEI Technology IMBA-X9654 User Manual Download Page 24

Page: 24 / 266

IMBA-X9654 ATX Motherboard

Page 6

Expansion Options

One PCIe x16 slot

Three PCIe x4 slots

Three PCI slots

Infrared (IrDA)

One IrDA by pin header

LAN

Dual Intel® Broadcom BCM5787M PCIe GbE chipsets with

ASF 2.0 support

SuperIO

ITE IT8712F

SSD

CF Type II

Digital I/O

8-bit digital I/O, 4-bit input/4-bit output

COM

Five RS-232 serial ports (four internal, one external)

One RS-232, RS-422 or RS-485 serial port (internal)

USB 2.0

Eight USB 2.0 devices supported

IDE

Two 40-pin IDE connector connects to two Ultra

ATA33/66/100 devices

SATA

Six 3.0Gb/s SATA II drives supported

Keyboard/mouse

Two PS/2 connectors for keyboard and mouse

Parallel Port

One external parallel port of connection to parallel

communications device (e.g. printer)

Watchdog Timer

Software programmable 1-255 sec. by super I/O

Power Supply

ATX power only

Power Consumption

[email protected], [email protected] and [email protected]

(Intel® Pentium® 4 3.73GHz, 1066MHz FSB CPU and 1GB

667MHz DDR2)

Temperature

0ºC – 60ºC (32ºF - 140ºF)

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 24 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: