IEI Technology IMBA-X9654 User Manual Download Page 112

Page: 112 / 266

IMBA-X9654 ATX Motherboard

Page 94

5.4.4 CF Card Installation

NOTE:

The IMBA-X9654 can support both CF Type I cards and CF Type II

cards. For the complete specifications of the supported CF cards

please refer to

Chapter 2

To install the a CF card (Type 1 or Type 2) onto the IMBA-X9654, please follow the steps

below:

Step 1:

Locate the CF card socket

. Place the IMBA-X9654 on an anti-static pad with

the solder side facing up. Locate the CF card.

Step 2:

Align the CF card

. Make sure the CF card is properly aligned with the CF

socket.

Step 3:

Insert the CF card

. Gently insert the CF card into the socket making sure the

socket pins are properly inserted into the socket. See

Figure 5-9

Step 0:

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 112 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: