IEI Technology IMBA-X9654 User Manual Download Page 173

Page: 173 / 266

IMBA-X9654 ATX Motherboard

Page 155

FullSpeed

The controller is capable of operating at 12Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480Mb/s

BIOS EHCI Handoff

Use the

BIOS EHCI Handoff

option for systems running OSes that do not have EHCI

hand-off support. The EHCI ownership change is managed by the EHCI driver.

Disabled

Systems with OSes that do not support EHCI can

use the EHCI handoff functionality.

Enabled D

EFAULT

Systems with OSes that do not support EHCI cannot

use the EHCI handoff functionality.

6.3.11.1 USB Mass Storage Device Configuration

Note:

This option is only available if a USB drive is inserted into the USB port.

Use the USB Mass Storage Device Configuration menu (BIOS Menu 16) to configure USB

mass storage class devices.

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 173 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: