IEI Technology IMBA-X9654 User Manual Download Page 126

Page: 126 / 266

IMBA-X9654 ATX Motherboard

Page 108

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2:

Align the connectors

. Each cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the IMBA-X9654 USB connectors.

Step 3:

Insert the cable connectors

.. Once the cable connectors are properly aligned

with the USB connectors on the IMBA-X9654, connect the cable connectors to

the onboard connectors. See

Figure 5-19

Figure 5-20: Four Port USB Cable Connection

Step 4:

Attach the bracket to the chassis

. The USB 2.0 connectors are attached to a

bracket. To secure the bracket to the chassis please refer to the installation

instructions that came with the chassis.

Step 0:

5.8 External Peripheral Interface Connection

The following external peripheral devices can be connected to the external peripheral

interface connectors.

Summary of Contents for IMBA-X9654











































































































































































































































































Search results

Summary of Contents for IMBA-X9654

Reviews:

IEI Technology IMBA-X9654, User Manual, Page: 126 / 266

Search results

Summary of Contents for IMBA-X9654

Reviews: