manualshive.com logo in svg

IEI Technology IMBA-X9654, User Manual, Page: 108 / 266

Share
Download
IEI Technology IMBA-X9654 User Manual Download Page 108

 

 

IMBA-X9654 ATX Motherboard

Page 90 

5.4.2 LGA775 Cooling Kit Installation   

 WARNING: 

It is strongly recommended that you DO NOT use the original heat 

sink and cooler provided by Intel on the IMBA-X9654. 

IEI’s cooling kits include a support bracket that is combined with the 

heat sink mounted on the CPU to counterweigh and balance the load 

on both sides of the PCB. 

 

 

Figure 5-5: IEI CF-520 Cooling Kit 

 

Figure 5-6: IEI CF-775A-RS Cooling Kit 

Two optional, separately purchased LGA775 IEI CPU cooling kits are available. The IEI 

CF-520 is shown in 

Figure 5-5

 and the CF-775A-RS is shown 

Figure 5-6

 can be 

purchased separately. The cooling kit comprises a CPU heat sink and a cooling fan. 

Summary of Contents for IMBA-X9654











































































































































































































































































Reviews:

No comments