References
Setup menus - Receiver
57
Details of the setup menus - receiver
Wireless setup > SSID
Setting SSID
Items
Enter the SSID. 1-16 characters.
Characters are alphabet, numbers, and other symbols.
Set the SSID for wireless LAN. Default SSID is set at the factory.
Default SSID has been set to not overlap with other CW-F25 units. Therefore there is
no need to re-set the SSID for normal use.
If a space is entered between characters, the system will recognize the SSID characters
up to the space. Characters after the space will not be recognized. Ensure the character
string is the same on the transmitter and receiver. Power cycle after changing SSID.
Wireless setup > Password
Setting password
Items
Enter the Password for Wireless LAN. 8 - 16 characters.
Characters are alphabet, numbers, and other symbols.
Set password for wireless LAN.
Default password is set at the factory.
If a space is entered between characters, the system will recognize the password
characters up to the space. Characters after the space will not be recognized. Ensure the
character string is the same on the transmitter and receiver.
Transmission interruption will occur when the password setting is changed during
transmission. However, it will re-connect soon after.
Network setup > IP address
Setting IP address (1)
Items
Enter IP address
Set IP address.
The Default IP address of receiver is 192.168.98.200. Please change if it overlaps with
existing equipment on the LAN. Power cycle to allow changes to take effect.
Network setup > Netmask
Setting IP Netmask
Items
Enter IP Netmask
Enter IP Netmask. The default value is 255.255.255.0
Power cycle to allow changes to take effect.
