Operation of CW-F25
IP camera setup - wireless LAN bridge -
33
7.
The Wireless LAN bridge function can be used at the same time as downlink video and
return video transmission.
Note:
During transmission the Downlink and return video take priority over the
Ethernet data communication. Therefore, it is recommended to lower the frame
rate and video resolution on the IP camera when operating both SDI and Ethernet.
Setting values will depend on the transmission distance and operational
environment; Please test prior to use.
Ethernet interface does not support PoE (Power Over Ethernet). Please prepare a
separate power source for IP cameras and other Ethernet devices.
CW-F25 has no DNS and DHCP server. Therefore, please assign a static IP
address to the IP camera and other Ethernet devices or prepare a separate DNS
and DHCP server.
Please do not connect the Ethernet terminal of transmitter and receiver to the
same LAN network. CW-F25 will act as wireless LAN bridge resulting in
Ethernet topology loop. Ethernet topology loop will cause faults, such as
degradation of performance and/or network failure.
