References
Setup menus - Transmitter
53
Set H.264 bit rate of downlink video transmission.
Default setting is "AUTO".
"AUTO" enables an adaptive variable rate control function. The bit rate will
automatically adjust according to the wireless channel capacity.
If a single bit rate is selected, transmission with a constant bit rate is achieved.
Video > Embedded audio
Setting embedded audio
Items
ON / OFF
Set ON/OFF of SDI embedded audio on downlink video transmission.
ON: SDI embedded audio channel 1-4 of group1 will be transmitted.
OFF: SDI embedded audio will not be transmitted.
Tally > Tally mode
Setting GPI output
Items
Remote / Link status
Set GPI output.
Default setting is "Remote"
Remote:
Contact state is either open or closed. Input for GPI terminal of receiver
is output from GPI output terminal of transmitter.
Link status: Becomes independent from the GPI status of receiver. The following are
the statuses of the wireless LAN connection which is output from the GPI
terminal on the transmitter.
Not linked:
Open
Waiting for link: Alternating short and open (flashing)
Linked:
Short
Intercom > Intercom
Setting intercom
Items
ON / OFF
Enable or disable the intercom.
Default is ON.
Intercom > Mic level
Setting microphone gain
Items
0(min) - 10(max)
Set the audio input gain of intercom.
