References
Setup menus - Receiver
59
Items
ON / OFF
Set ON/OFF of SDI embedded audio on return video transmission.
ON: SDI embedded audio channel 1-4 of group1 will be transmitted.
OFF: SDI embedded audio will not be transmitted.
Tally > Remote Tally
Setting GPI input
Items
ON / OFF
Set GPI input.
Default is ON.
ON: Contact state is either open or closed. Input of GPI terminal on the receiver is
outputting from the GPI output terminal of the transmitter.
OFF: GPI input of the receiver is disabled.
Remote > Interface
Setting RS-422
Items
RS-422 / OFF
Settings of remote RS-422.
Default setting is OFF.
If "RS-422" is selected, remote transmission of RS-422 is enabled.
Remote > Baud rate
Setting baud rate
Items
9600 / 19200 / 38400 / 57600 / 115200 /
230400 / 460800 (bps)
Set baud rate of RS-422.
Default value is 38400bps.
Must match the baud rate of the RS-422 equipment.
Remote > Data bit
Setting data bit length
Items
8 / 7 (bit)
Set the data bit length of the RS-422.
Default value is 8bit.
Must match the baud rate of the RS-422 equipment.
