Idview Digital IV-SGVA-100 User Manual Download

Page: 28 / 40

the

IV-SGVA

wake up and check if there is a motion. If there is no motion then the

IV-SGVA

goes into sleep-mode again, but if there is a motion then the

IV-SGVA

start to record.
This low-powering technology is very important when you are using the battery as
power source for the

IV-SGVA

. But, if you use the AC power for the

IV-SGVA

operate, then this low-powering technology is not much helpful to you.
Suppose that if you want to record for a long time and there is no AC power then you
need another battery to operate the

IV-SGVA

for such a long time. If you get battery

with 5 volts output then you can connect that battery to the AC adaptor input port of the

IV-SGVA

directly. And the

IV-SGVA

does not recognize the difference between the

battery and the AC power connected to the power input port, so that you can save the
battery even though it is connected to the AC power port.
If the

IV-SGVA

recognizes that it is a battery connected to the power input port of the

IV-SGVA

then this “2.SAVE AC” function is not needed. But the

IV-SGVA

does not

recognizes the difference, and this “2.SAVE AC” function is needed separately from
“3.SAVE BAT”.

In the case that you want to record objects passing once and quickly

before the

IV-SGVA

, then turn off this function.

It can also extend the lifetime of the external battery pack (SG-938) provided by
our company by setting this function to ON.

Caution

: Set it to off when using the Bluetooth.

4-7-2-3. SAVE BAT: ON

This function is to save the battery by using the low-powering technology. If there is no
motion then the

IV-SGVA

goes into the sleep-mode. After 2 seconds have elapsed,

the

IV-SGVA

wake up and check if there is a motion. If there is no motion then the

IV-SGVA

goes into sleep-mode again, but if there is a motion then the

IV-SGVA

start to record. This low-powering technology is very important when you are using the
battery as power source for the

IV-SGVA

In the case that you want to record objects

passing once and quickly before the

IV-SGVA

, then turn off this function.

Caution

: Set it to off when using the Bluetooth.

4-7-2-4. ULTRA SAV: ON

When you set this function to on, then you can maximize the battery usage time.

If this function is on, then the

IV-SGVA

starts to record only if it detects audio not a

movement, so the

IV-SGVA

does not record even if there is a movement.

Caution

: Set it to off when using the Bluetooth.

4-7-2-5. VIDEO TIME: 2

You need to set the “VIDEO TIME” (0-9 seconds) to record the images when the
camera detects motions. For example, if you set the “VIDEO TIME” to 2, then the

IV-SGVA

starts to record the images from the camera for 2 seconds as soon as it detects

a motion. But if it detects another motion during recording the image for the previously
detected motion, then the recording time for that newly detected motion automatically
becomes another whole set value of 2 seconds.

Caution

: If you set this time to 0, then the

IV-SGVA

will not record any images when

it detects motions.

4-7-2-6. AUDIO TIME: 2

This function sets for the audio recording time (0-9 seconds). When “AUDIO DET” is
set to off, then the

IV-SGVA

starts to record audio only in the case that the

IV-SGVA

detects both the motions from the camera and sounds by the microphone. When

“AUDIO DET” is set to on, then the