53
You can prohibit people without the authority from accessing the
IV-SGVA
by
creating a password for each function (BOOTING, OPTION, SEARCH, and RECORD).
You can turn each function on and off in “CHANGE PWD”.
Functions
When each function is set with a password
BOOTING
Put in the password for the
IV-SGVA
to operate when you turn it on.
OPTION
Put in the password to change various settings or options.
SEARCH
Put in the password to search the data.
RECORD
Put in the password to start recording.
BLUETOOTH Put in the password to access other
IV-SGVA
s via BLUETOOTH
The initial default password is “0000”. To change the password, first, put in the
password that you have been using so far, and then put in the new password.
The password reads as “****” as you put in the password. Using [ ] and [ ]
△
▽
, choose a
number for your password, then the number reads as ‘*’, and the cursor moves to the
next position as you press [
▷
]. After you complete putting in all the numbers press
[ENT], and repeat the same process until you complete putting in all the numbers for
the password. Once you put in the correct value that matches with the old password,
you will be asked to put in the new password. Repeat the same process as above, and
enter the same password again to confirm the new password. You must press [ENT] to
54
save the new password. If you press [ESC] after putting in the new values, then the
password cannot be saved.
4-7-2. POWER SET
4-7-2-1. AUTO OFF: 5min
The
IV-SGVA
automatically turns off the power or goes into the power-savings mode
if you don’t press any buttons for a certain amount of time (0-9 minutes).
In “RECORD” and “TRANSMIT” modes,
IV-SGVA
turns off only the LCD, LAMP for
the battery status and the LAMP for the recording status to save the battery. But, in the
rest of the modes besides “RECORD” and “TRANSMIT”, it turns off the power
completely. Set the time to 0 to deactivate the “1. AUTO OFF” function.
4-7-2-2. SAVE AC: OFF
This function is to save the power by using the low-powering technology. If there is no
motion then the
IV-SGVA
goes into the sleep-mode. After 2 seconds have elapsed,
