45
4-3. SEARCH SET
Select “3.SEARCH SET” using the direction buttons, and press [ENT]. Then the next
screen appears in the LCD as below.
4-3-1. REPEAT: OFF
If you turn on “a. REPEAT”, then it keeps repeating playback the file. When it is turned
off, then the file stops from playing after its first playback.
4-3-2. AUDIO: ON
If you turn on “b. AUDIO”, then “c.BT AUDIO” automatically becomes “OFF”, and plays
the audio recorded by the microphone (internal or external). If you turn off “b.AUDIO”,
and select one of the Bluetooth channel (BT1 – BT 7), then the audio for the selected
46
channel gets played from the speaker. If you turn off both for the “b.AUDIO” and “c.BT
AUDIO”, then only the video will play without the audio.
4-3-3. BT AUDIO: OFF (
IV-
SG
VA
-300
/
310 only)
You can select one from the 8 options (OFF, BT1 – BT7). If you select OFF for “c. BT
AUDIO“, then the
IV-SGVA
does not play the audio recorded by the slave
IV-SGVA
via Bluetooth. If you select one from BT1 to BT7, then “b.AUDIO” automatically
becomes “OFF”, and the audio from a Bluetooth channel gets played. If “c.BT AUDIO”
is OFF and
“b.AUDIO” is ON, then the
IV-SGVA
play the audio recorded by the microphone. If
you turn off both for the “b.AUDIO” and “c.BT AUDIO”, then only the video will play
without the audio.
4-3-4. FASTAUDIO: OFF
If you turn on “c. FASTAUDIO”, then the audio and video plays together during the
High-Speed Play. When it is turned off, then only the video plays during the High-
Speed Play.
4-3-5. TIME SYNC: OFF
Time Sync function decides on whether to playback each file saved from different
cameras synchronized with the time. During playback, you can switch between 4-
channel mode and single channel mode by pressing [ ]. If you turn on Time Syn
▽
c
function, and change the channels in a single-channel mode one by one and play it,
then the time frames of each file gets automatically synchronized with all files as you
press “
->
(Play)”, so that that you can play from the same position stopped from the
other camera.
In the time frame, if there is no saved image for a certain position (time) from camera 2
to be synchronized with camera 1, then the time frame bar for camera 2 moves to its
closest position to that certain time. If this function is turned on and you switch into 4-
channel mode from single-channel mode, then all four files are synchronized with time.
If this function was turned off, and you have played each file in the single-channel mode
and stopped in different positions in the time frame bar, but switch into 4-channel mode,
then it takes about 2 to 3 seconds for all the files to be synchronized with the time. And
the screen displays with the massage, “Sync…” for that time.
