23
Memory Card Slot:
This is the place where you put in the standard RS-MMC memory
card. If you need to expand the memory from the built-in, internal memory, you can get
this from where you have purchased the
IV-SGVA
. This product provides a memory
card, which lacks in memory.
Cautions: Do not insert or remove the memory card from the slot while recording or
searching. If you want to remove the memory card from the slot, then you must exit
from “RECORD” or “SEARCH” mode first, before removing the memory card from the
slot.
Insertion of RS-MMC Memory Card
Camera Hole 1 (Built-In):
IV-SGVA
has one built-in CCD camera on the front side of
the
IV-SGVA
. Be sure that this camera hole is not blocked to prevent from the
IV-SGVA
unable to record the images.
Camera Hole 2 (Optional):
IV-SGVA
can be installed with another CCD camera on
the rear side to record images from the back of the
IV-SGVA
.
Mic Hole 1 (Built-In):
This is where a highly efficient microphone is installed on the
front side of the
IV-SGVA
. Be sure that this hole is not blocked in order to record the
audio.
Mic Hole 2 (Built-In):
IV-SGVA
has second built-in microphone on the rear side. Be
24
sure that this hole is not blocked in order to record the audio.
Battery Status & Charge Lamp:
This lamp indicates how much of the battery is left.
Lamp with the green color indicates that the battery is full. The color of this lamp
changes into yellow when the battery is half full, and the red color means that the
battery is almost used up. If you connect the AC adaptor to the
IV-SGVA
when the
battery is not full, then it automatically charges up the battery to its fullest. While
charging the battery, the lamp blinks with the green light. After charging is completed,
the lamp stops blinking and you will see the green light indicating that the battery is full.
Recording Status Lamp:
This lamp is to check on the recording status. When the
IV-SGVA
is not in the “RECORD” or “TRANSMIT” mode, the color is green and the
color changes into red when the
IV-SGVA
goes into recording or server mode. In the
“RECORD” or “TRANSMIT” mode, the color is still red if there is no motion detected by
the
IV-SGVA
. But when the
IV-SGVA
detects a motion, then the color turns into
yellow, and turns back to red. So if the
IV-SGVA
continues to detect motions, then the
color alternates between red and yellow. If you turn on the audio detection function
(OPTION
→ 6.OTHERS → 2.POWER SET → 7.
AUDIO DET), and audio is detected,
then this lamp blinks with red color.
Control Buttons
ESC:
This button is to go to the previous menu from the current menu, or is to cancel
the selected values.
ENT
: This button is to go to the selected menu or to apply the changed values.
△
:
This button is used to move up in the menu or to enter into the image magnification
mode in “1.CAMERA”, “2.RECORD”, and “SEARCH”, or to select certain values from
the “OPTION” mode.
▽
:
This button is used to move down in the menu, or to enter into, or to select certain
values from the “OPTION” mode.
◁
:
In the menu, this button is used to move to the left or to select certain values.
▷
:
In the menu, this button is used to move to the right or to select certain values.
External Antenna Port
: This port is to connect external antenna for Bluetooth. You can
transmit data about 80 – 100 meters using the built-in antenna. If you use the high gain
external antenna, you can increase the transmit range up to several kilometers. And
the distance depends on the kind of antenna gain.
