IDK HDC-TH401, User Manual

Page: 64 / 65

HDC-TH401/201/101 User Guide
64
Problem Check item Page
Audio output
Audio is output from
HDMI output
connectors but not
from analog output
connectors.
If compressed audio (such as Dolby Digital, DTS, and so on) is
input, analog audio is not output.
The HDC supports only 2ch LPCM.
19
Audio is output from
analog output
connectors but not
from HDMI output
connectors.
If “ 7.18 Setting audio output ” is set to “OFF”, change the setting to
“ON”.
46
Connected sink device or AV amp select the resolution which can
output audio? If you select PC resolutions (VGA to WUXGA), there
is a case those units cannot output audio.
27
Connected sink device ot AV amp support output sampling
frequency? There is a case that LCD monitor cannot output higher
sampling frequency such as higher that 88.2kHz. If this is the case
you can limit output sampling frequecy from input by EDID.
36
to
42
Compressed audio
(such as Dolby
Digital and DTS) is
not output from the
source device.
Inputting compressed audio is limited by the EDID setting
(factory default). In order to use compressed audio, change the
EDID setting.
36
to
42
Verify audio output setting of input device.
－
If additional assistance is required, please perform the following tests and then contact us.
1. Does the same problem occurs at all connectors?
2. Connect the devices using genuine cables without connecting the HDC.
The problem still cannot be solved? Please contact us for assistance.