HDC-TH401/201/101 User Guide
33
7.7 Setting No-signal input monitoring time of Video signal
If you change the EDID settings of the HDC or power the HDC off/on, the source device may not output a
video signal. Use this menu to set the monitoring time. This is the interval beginning when a source device is
not outputting a signal; and ending at the point when the HDC requests an output from that source device.
・
No-signal input monitoring time (OFF, 2 to 15 sec. [Default: 10 sec.])
[Fig. 7.5] No-signal input monitoring time
Notes:
・
If you are using the monitor power-saving or dual monitor features on your PC, set this feature to “OFF”.
This will avoid potentially unpredictable operation.
・
When using this feature, ensure that the “monitoring time” is set for a value greater than the amount of
time needed for the source to provide an output signal.
[Fig. 7.6] Repeating output signal setting
Changing
EDID
ON
OFF
Requesting the source devices
to output video signals
No-signal input
monitoring time
Hot plug
ON
OFF
Video signals
from source
device
Changing EDID
Monitoring time
ON
OFF
Outputting video from source device
Video signals from
source device
Monitoring time Monitoring time
Requesting the source devices to output video signals
