HDC-TH401/201/101 User Guide
16
5 Precautions
Before using, read this document.
5.1 Installation
When installing the HDC, observe the following precautions.
・
Before connecting HDC or an external device, dissipate static electricity by touching grounded
metal such as racks before handling signal cables. Failure to observe this precaution may result
in ESD (electrostatic discharge) damage.
・
Do not block vent holes.
・
When the HDC needs to be mounted in an enclosed space, ensure that sufficient ventilation or
cooling is provided. If inadequately vented, the product’s service life, operation and reliability
may be affected.
5.2 Connection
When connecting the HDC to external devices, please observe the following precautions.
・
Read manuals for the external devices.
・
Before you connecting cables to the HDC or an external device, dissipate static electricity
by touching grounded metal such as racks before handling signal cables. Failure to observe
this precaution may result in ESD (electrostatic discharge) damage.
・
Power all units off before connecting cables.
・
Be sure to fully seat all plugs and connections and dress cables to reduce stress on connectors.
5.2.1 Connecting HDMI
・
Please use HDMI 19-pin TypeA (male) cable which is shorter than 16 ft. (5 m).
・
Be sure to plug cables completely and install them without any stress on connectors.
・
Use a cable clamp to prevent those cables from falling off.
[Fig. 5.1] Cable clamp
