HDC-TH401/201/101 User Guide
35
7.8 Setting Deep Color
You can set the Deep Color (color depth) that is output from the source device.
This setting is applied if the source and sink devices are connected and “
” is set
to a number of “3” to “22 (Built-in EDID)”.
The Deep Color of the source device can be output if the source and sink devices support Deep Color.
Supported Deep Color: 10bit/component (30bit/pixel) and 12bit/component (36bit/pixel)
(8bit/component ((24bit/pixel)) is set by default.)
Note:
If you select “10bit/component (30bit/pixel)” or “12bit/component (36bit/pixel)”, the transmission clock will be
faster resulting in noise on video when a poor-quality cable or long cable is connected. In this case, change
the setting to “24bit/pixel (8bit/component)”.
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button
set INPUT Deep Color → select F20
↓ SET button
“
－
” “
＋
” button set Deep Color [Default: 08: 8bit/component (24bit/pixel)]
08 :
8bit/component (24bit/pixel)
10 :
10bit/component (30bit/pixel)
12 :
12bit/component (36bit/pixel)
↓
During Deep Color setting is processing, READY LED is OFF.
After setting is finished, the LED is ON.
↓
After processing, 7-SEGMENT LED goes back to menu.
