HDC-TH401/201/101 User Guide
26
・
Setting by menu
Normal condition (OFF)
↓ SET Key
“
－
” “
＋
” button
EDID copy data1 → select F01
EDID copy data2 → select F02, EDID copy data3 → select F03
↓ SET button
“
－
” “
＋
” button select output connector [Default: 01: HDC OUTPUT]
HDC OUTPUT → 01, OUTPUT1 → 02, OUTPUT2 → 03,
OUTPUT3 → 04, OUTPUT4 → 05
*HDC-TH201 cannot select 04 and 05.
*HDC-TH101 cannot select 03, 04, and 05.
↓ SET button
During EDID copy is processing, READY LED is OFF. After copying is finished, the LED is ON.
If there is connection error, error on reading EDID, error on writing EDID, or checksum error
occurred, ERROR LED is ON. Please copy EDID again.
↓
After processing, 7-SEGMENT LED goes back to menu.
