HDC-TH401/201/101 User Guide
60
8 Specification
8.1 Product specification
Item
Description
Model number
HDC-TH101
HDC-TH201
HDC-TH401
Input
Video
HDMI / DVI
Number / Signal
1 input / HDMI (*1) / DVI 1.0
- HDCP
- TMDS single link
- TMDS clock: 25 MHz to 225 MHz
- Dot clock: 25 MHz to 165 MHz
Connector
1 female HDMI Type A (*2)
Formats
480i / 480p / 576i / 576p / 720p / 1080i / 1080p
VGA to QWXGA
* VESA1080 / WUXGA / QWXGA: only Reduced Blanking is supported.
Color depth
24 bit, 30 bit, 36 bit Deep Color
Audio
Digital
Number / Signal
1 input / Multi-channel LPCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level:-20 dBFS
- Max. input level: 0 dBFS
Connector
1 female HDMI Type A (*2)
Output
Video
HDMI / DVI
Number / Signal
1 output / HDMI (*1) / DVI 1.0
- TMDS single link
- TMDS clock: 25 MHz to 225 MHz
- Dot clock: 25 MHz to 165 MHz
Connector
1 female HDMI Type A (*2)
HDBaseT
Number
1 output
2 outputs
4 outputs
Signal
HDBaseT
- HDCP
- TMDS single link
- TMDS clock: 25 MHz to 225 MHz
- Dot clock: 25 MHz to 165 MHz y
Connector
1 RJ-45 (*3)
2 RJ-45 (*3)
4 RJ-45 (*3)
Formats
480i / 480p / 576i / 576p / 720p / 1080i / 1080p
VGA to QWXGA
* VESA1080 / WUXGA / QWXGA: only Reduced Blanking is supported.
Color depth
24 bit, 30 bit, 36 bit Deep Color
Audio
Digital
Number
1 output
2 outputs
4 outputs
Signal
Multi-channel LPCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level: -20 dBFS
- Max. output level: 0 dBFS
Connector
1 female HDMI Type A (*2)
2 female HDMI Type A (*2)
4 female HDMI Type A (*2)
Analog
Number / Signal
1 output / Stereo LR unbalanced signal
-
Output impedance: 75 Ω
- Reference level: -10 dBu
- Max. output level: +10 dBu (*4)
Connector
1 RCA jack
Function
Others
Seven segment LED signal status check
Anti-Snow (*5)
Connection Reset (only HDMI output) (*6)
Plug & Play
DDC2B
(can be selected from Built-in EDID, Copied EDID, and EDID of connected receiver)
Cable
CAT.5E HDC, Cat5e UTP / STP, Cat6 UTP / STP (*7)
Max. extension distance
197 ft. (60 m) (*8)
Others
AC adapter
100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz
Power consumption
About 9 Watts
About 12 Watts
About 18 Watts
Dimensions
8.3 x 1.7 x 11.8” (210 (W) x 44 (H) x 300 (D) mm)
(EIA 1U high, half rack wide) (Excluding connectors and the like)
Weight
4.2 lbs. (1.9 kg)
4.2 lbs. (1.9 kg)
4.4 lbs. (2.0 kg)
Temperature
Operating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/ Storage humidity: 20% to 90% (Non Condensing)
*1
x.v.Color, HEC, 3D, and ARC are not supported.
CEC: Pass-through between the input and a selected output.
*2
Please use HDMI cable which is shorter than 16 ft. (5 m).
*3
RJ-45 (HDBaseT input/output connectors) is only for Cat5e/Cat6 twisted pair cable. Please do not use it for LAN devices or the like.
*4
Analog audio output supports only 2-channel LPCM.
*5
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*6
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the HDC’s output. If other devices are connected between the HDC’s output and sink device, this feature
may be invalid.
*7
T568A or T568B straight connection. HDC.CAT5E cable is HDBaseT recommended cable which IDK developed.
*8
The maximum extension distance is the shorter one of transmitter/receiver/sink device connected to the HDC-TH101, 201, and 401.
To transmit HDCP-compliant DVI signals, use an IDK’ HDBaseT extender supporting DVI.