HDC-TH401/201/101 User Guide
39
7.12 Setting Dolby D Audio
You can set the Dolby D Audio that is output from the source device.
This setting is applied if the source and sink devices are connected and “
” is set
to a number of “3” to “22 (Built-in EDID)”.
Notes:
・
Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
・
Audio is not output from the analog output connector of the HDC.
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button set INPUT Dolby D Audio
→ select F28
↓ SET button
“
－
” “
＋
” button set Dolby D Audio [Default: OFF]
OFF 32: 32 kHz 44: 44.1 kHz 48: 48 kHz
↓
During Dolby D Audio setting is processing, READY LED is OFF.
After setting is finished, the LED is ON.
↓
After processing, 7-SEGMENT LED goes back to menu.
