HDC-TH401/201/101 User Guide
19
6 Basic Operation
6.1 Notes on use
1) Extension distance is 197 ft. (60 m) using Cat6 cable. The maximum extension distance of a twisted pair
cables is the shorter distance of the maximum extension distances of transmitter/receiver/sink device
connected to the HDC.
2) Input power is AC 100 V to 240 V. Ensure before you turn on the unit.
3) xvYCC, Lip Sync, HEC, 3D, and ARC are not supported.
4) For DVI signal output, use DVI-I or DVI-D
HDMI conversion cable (DualLink DVI is not supported).
5) CEC is pass through between INPUT and OUTPUT which is selected in
”. Please
test CEC connection before you use other manufacturers source and sink devices.
6) Audio format which is shown in below table are supported. Factory default setting is 2ch liner PCM.
If you use the HDC’s analog audio output, first select 2ch liner PCM and then set the audio format of the
source device. If you use other format, select internal EDID and select expected audio format.
7) 10bit/component (30bit/pixel) and 12bit/component (36bit/pixel) Deep Color are supported. If you cannot
get Deep Color output from source device, please set Deep Color setting of the HDC, and then set the
source device video settings. Factory default is 8bit/component (24bit/pixel).
8) Use IDK’s HDBaseT extender supporting DVI signals to transmit HDCP-compliant DVI signals.
9) If you got any trouble, see “
[Table 6.1] Supported digital audio format
Audio format
Details
Example of medias
2-channel LPCM
2ch, 32 to 192kHz, 16/20/24bit
CD, DVD-Video,
DVD-Audio
Multi-channel LPCM
8ch, 32 to 192kHz, 16/20/24bit
DVD-Audio
AC-3, Dolby Digital, DTS
Bit stream
DVD-Video
Dolby , DTS-HD,
Dolby TrueHD
Bit stream
HD DVD, Blu-ray Disc
AAC
Bit stream
TV broadcast
◆
CEC
: Consumer Electronics Control
◆
Deep Color : The HDC supports 30bit/36bit Deep Color.
