HDC-TH401/201/101 User Guide
42
7.15 Setting Dolby TrueHD Audio
You can set the Dolby TrueHD Audio that is output from the source device.
This setting is applied if the source and sink devices are connected and “
” is set
to a number of “3” to “22 (Built-in EDID)”.
Notes:
・
Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
・
Audio is not output from the analog output connector of the HDC.
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button set INPUT Dolby TrueHD Audio
→ select F34
↓ SET button
“
－
” “
＋
” button set Dolby TrueHD Audio [Default: OFF]
OFF 44: 44.1 kHz 48: 48 kHz
88: 88.2 kHz 96: 96kHz
176: 176.4 kHz 192: 192 kHz
↓
During Dolby TrueHD Audio setting is processing, READY LED is OFF.
After setting is finished, the LED is ON
↓
After processing, 7-SEGMENT LED goes back to menu.
