FDX-32 Command Guide
49
@GEN / @SEN
HDCP output
Function
Getting
Setting
Format
@GEN,out_ch
@SEN,out_ch,hdcp
Return value
@GEN,out_ch,hdcp
@SEN,out_ch,hdcp
Parameter
out_ch: Output channel
0 = All inputs
1 to 32 = OUTPUT1 to OUTPUT32
- 2 = Scan converter output slot board is not installed..
hdcp : HDCP output
0 = HDCP is not output until an input channel which has HDCP is selected. [Default]
1 = HDCP is output only if input signals are with HDCP.
Example
@GEN,1
@GEN,1,0
Getting the current HDCP output of output
channel1.
Set to “0” (HDCP is not output until an
input channel which has HDCP is
selected.).
@SEN,1,1
@SEN,1,1
Setting HDCP output of output channel1 to
“0” (HDCP is not output until an input
channel which has HDCP is selected.).
Completed normally.
Remarks
Supported since firmware ver.2.xx.
