FDX-32 Command Guide
43
@GOT / @SOT
Output resolution
Example
@GOT,1
@GOT,1,1,25
Getting the current output resolution of
output channel1.
Automatically set to [email protected]
(1920x1080)
@SOT,1,0,25
@SOT,1,0,25
Setting output resolution of output
channel1 to “25”
[email protected](1920x1080)).
Completed normally.
Remarks
Supported since firmware ver.2.xx.
@GUM / @SUM Aspect ratio of sink device
Function
Getting
Setting
Format
@GUM,out_ch
@SUM,out_ch,aspect
Return value
@GUM,out_ch,aspect
@SUM,out_ch,aspect
Parameter
out_ch: Output channel
1 to 32 = OUTPUT1 to OUTPUT32
- 2 = Scan converter output slot board is not installed..
aspect : Aspect ratio of sink device
0 = To be output with aspect ratio of output resolution [Default]
1 = Aspect ratio 4:3
2 = Aspect ratio 5:3
3 = Aspect ratio 5:4
4 = Aspect ratio 16:9
5 = Aspect ratio 16:10
Example
@GUM,1
@GUM,1,0
Getting the current sink device aspect
ratio of output channel1.
“0” (To be output with aspect ratio of
output resolution) is set.
@SUM,1,0
@SUM,1,0
Setting ink device aspect ratio of output
channel1 to “0” (To be output with aspect
ratio of output resolution).
Completed normally.
Remarks
Supported since firmware ver.2.xx.
