FDX-32 Command Guide
39
4.3.5 Output setting
@GEQ / @SEQ
Output equalizer
Function
Getting
Setting
Format
@GEQ
@SEQ,out_1,level_1 (,out_2,level_2
･･･
)
Return value
@GEQ,level_1,
･･･
level_32
@SEQ,out_1,level_1 (,out_2,level_2
･･･
)
Parameter
out_1 to out_32: Output channel
0 = All inputs, 1 to 32 = OUTPUT1 to OUTPUT32
level_1 to level_32 : Output equalizer of each output channel
0 = OFF [Default], 1 = LOW, 2 = MEDIUM, 3 = HIGH,
- 2 = Digital output slot board or digital scan converter output slot board is not
installed.
Example
@GEQ
@GEQ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0
Getting the current output equalizer status.
“0” (OFF) is set to all input channels.
@SEQ,0,0
@SEQ,0,0
Setting output equalizers of all input
channels to “0” (OFF).
Completed normally.
Remarks
－
@GDM / @SDM Output mode
Function
Getting
Setting
Format
@GDM
@SDM,out_1,mode_1 (,out_2,mode_2
･･
)
Return value
@GDM,mode_1,
･･･
mode_32
@SDM,out_1,mode_1 (,out_2,mode_2
･･
)
Parameter
out_1 to out_32:Output channel
0 = All inputs, 1 to 32 = OUTPUT1 to OUTPUT32
mode_1 to mode_32 : Output mode of each output channel
0 = AUTO MODE [Default], 1 = DVI MODE,
2 = HDMI YCbCr 4:4:4 MODE, 3 = HDMI YCbCr 4:2:2 MODE,
4 = HDMI RGB MODE, - 2 = Output slot board is not installed.
Example
@GDM
@GDM,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0
Getting the current output mode status.
“0” (AUTO MODE) is set to all input
channels.
@SDM,0,0
@SDM,0,0
Setting output modes of all input channels
to “0” (AUTO MODE).
Completed normally.
Remarks
－
