FDX-32 Command Guide
26
@GCY / @SCY
Copying input channel setting of output channel
Function
Getting
Setting
Format
@GCY,sch
@SCY,sch,dch_1 (,dch_2
･･･
)
Return value
@GCY,sch,dch_1,
･･･
dch_32
@SCY,sch,dch_1 (,dch_2
･･･
)
Parameter
sch : Output channel that have target input channel for copying settings
1 to 32 = OUTPUT1 to OUTPUT32
dch_1 to dch_32 : Target output channel for copying channel settings
0 = All outputs, 1 to 32 = OUTPUT1 to OUTPUT32
Example
@GCY,1
@GCY,1,2,3,4
Getting output channel which has the
same setting of input channel that is
assigned to the current output channel1.
The same input channel setting of output
channel1 is set to output channels2, 3, 4
@SCY,1,3
@SCY,1,3
Adding output channel3 to the destination
of input channel that is assigned to output
channel1.
Output channel3 has been added to the
destination of input channel that is
assigned to output channel1.
Remarks
Supported since firmware ver.2.xx.
