IDK FDX-32, Command Reference Manual

Page: 56 / 81

FDX-32 Command Guide
56
@RME Copying EDID
Function Setting
Format
@RME,out,number
Return value
@RME,out,number
Parameter out :Channel to be loaded
1 to 32 = OUTPUT1 to OUTPUT32
number : Destination memory number
1 to 4 = Memory 1 to 4
Example
@RME,1,1
@RME,1,1
Setting EDID of the sink device connected
to OUTPUT1 to Memory 1.
Completed normally.
Remarks
－
@GEC / @SEC EDID loading channel
Function Getting Setting
Format @GEC @SEC,in_1,out_1 (,in_2,out_2
･･･
)
Return value @GEC,out_1,
･･･
out_32 @SEC,in_1,out_1 (,in_2,out_2
･･･
)
Parameter in_1 to in_32 : Input channel
0 = All inputs, 1 to 32 = INPUT1 to INPUT32
out_1 to out_32 : EDID loading channel of each input channel
1 to 32 = OUTPUT1 to OUTPUT32,
-1 = Input slot board is not mounted., -2 = Output slot board is not mounted.
Example @GEC
@GEC,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,1,1,1,1,1,1,1,1,1
Getting statuses of EDID loading channel.
All input channels: From OUTPUT1.
@SEC,0,1
@SEC,0,1
Setting EDID loading channels of all input
channels to OUTPUT1.
Completed normally.
Remarks This command is available only if “0” (External EDID) is selected for EDID resolution.