17
Response FF80
- Installation
REAR FLUE OUTLET
INSTALLATION
14 FITTING THE WALL MOUNTING FRAME
Refer to Frame 34 for service connections.
Fit the wall mounting frame either:
a. Directly to the wall
z
z
z
z
z
Insert wall plugs.
z
z
z
z
z
Put the screws into the wall plugs and leave
10mm proud
z
z
z
z
z
Hang the frame onto the screws and tighten
up.
or
b. Use stand-off channels
(To allow pipework to be taken upwards).
z
z
z
z
z
Insert wall plugs.
z
z
z
z
z
Put the screws into the wall plugs and leave
10mm proud.
z
z
z
z
z
Fasten each channel to the frame with the
6mm screws provided.
z
z
z
z
z
Hang the channels and frame onto the screws
and tighten up.
Note.
If the clearances above and below the
boiler are less than the length of the pipes it
will be necessary to position the pipes behind
the wall mounting plate BEFORE the plate is
screwed to the wall.
Showing the use of 'stand-off' channels,
to enable upward pipework.