Protege GX Camera Integration
Protege GX supports the monitoring of the entry station camera as a streaming MJPEG video feed.
1.
Navigate to
Monitoring | Setup | Cameras
and click
Add
.
2.
Set the
Type
to
H.264 & Motion JPEG Stream Camera
.
3.
Enter the
URL
for the camera's image stream:
http://<IP_ADDRESS>:8080/video
.
If authentication is required to view the camera feed, include the login username and password in the URL.
For example:
http://username:[email protected]:8080/video
4.
When the
Show Sidebar Controls in Status Page
option is enabled, playback controls are displayed when the
camera feed is embedded into a status page.
5.
When the
Stretch Camera
option is enabled, the aspect ratio adjusts with the tile size. This may cause the
image to be distorted.
6.
The
Floor Plan
selection defines the floor plan that the camera is associated with.
7.
Click
Save
.
Once correctly configured, the camera can be monitored on floor plans and status pages and associated with
particular devices, allowing you to view archived camera footage from selected events.
PRT-ENTR-17 | Protege Vandal Resistant Touchscreen Entry Station | Installation Manual
40
