© 2012 ICS, Blount Inc.
F/N 522803 Jul12
814PRO SERVICE MANUAL
24
6
This section covers the service
instructions for the water and
hydraulic valve assembly
6.1
PRIOR TO DISASSEMBLY
A Clean exterior of the tool.
B Obtain a Water Valve Seal Kit so that
all seals exposed during disassembly
can be replaced. P/N 71944
6.2 ON-OFF VALVE SERVICING
TRIGGER AND SAFETY CATCH
REMOVAL & INSTALLATION
A Remove the plug button (19) from
the top of the handle by prying under
the edge and then pulling it from the
handle.
B Drive the roll pins (18) out of the
handle assembly using a 3/16 in./4
mm diameter punch. Press the safety
catch (28) and remove the
trigger (26).
C
The safety catch (28) can be
removed at this time by driving
out the 3/16 inch roll pin (19).
6. WATER VALVE ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......