![background image](http://html2.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_service-manual_3529626016.webp)
© 2012 ICS, Blount Inc.
F/N 522803 Jul12
814PRO SERVICE MANUAL
14
D GEARS
The drive and idler gears should have
straight tips without nicks, square
tooth ends and a smooth even polish
on the teeth and end faces. Check
for cracks between the drive gear
keyway and gear tooth root. Replace
the gear if cracks are present.
E VALVE HANDLE MOTOR SURFACE
The surface near the gears should
show two interconnecting polished
circles without a step. The bottom of
the o-ring groove should be smooth
as should the rest of the flat surface.
The bore for the shaft seal should be
smooth or oil leakage may occur.
F GEAR HOUSING
The gear housing should be clean
and free of scratches.
5. MOTOR ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......